|Special Features||New Ships 2-3 Days|
Tactical light war belt with MOLLE attachment system.
Designed to attach equipment by means of MOLLE/UMTBS lock on the lower body level. That makes possible to lower the center of mass, unload upper part of the spine, and provide easier access to items of equipment.
Front side of the belt has a low profile (width of only 100 mm), which provides good ventilation without use of ventilation padding.
Front of the belt is made with no belt through channel (as in most belts), which significantly reduces weight of the product. Loose ends of the belt can be tucked away in specially designed pockets. Same pockets can be used as a pocket for a folding knife with a clip.
Outside rows of MOLLE/PALS strips have 17 cells (size S), 21 cell (size M), 25 cells (Size L)
The inner side of the belt is made from wear-resistant synthetic fabrics, same as the front side. Such material combination dramatically extends life of the product with the minimum difference in waist ventilation. Inner side also has a MOLLE/PALS strip, which allows hanging additional magazine pouches without using facade cells.
Belt adjustment sling is sewn in on the front of the waistband. With this belt design slipping out of the loaded belt is easy just push on the buckle. Problem of dangling loose ends was originally solved by crating belt pockets, that securely hides it. This solution allows for quick adjustment of the loaded belt, without removing or undoing the buckle.
The belt fastens with a solid 50 mm Duraflex plastic buckle with two-way adjustment. Belts of all sizes have a belt strap with a wide range of adjustments, allowing you to use this product, both in summer and in winter (check out the range of adjustments under: Weight, size, dimensions).
Ways of wearing:
Independent belt with light load pouches. Such option is the most versatile, allows access to remote pouches by turning belt on itself.
With hip platforms. Use of special platforms can achieve the optimum level of equipment deployment for quick access to them. In this combination tactical war belt is not attached to upper body components and hip platforms will not limit user's mobility.
As part of Tactical Gear Attachment System with straps fastened to the support loops. For secure fit attachment straps on the back have plastic belt loops. Front strap attachment is done by threading MOLLE /PALS belt cells.
Attaching the belt to the breastplate is not recomended, because it will increase the load on the shoulders and severely limited mobility. Materials: Cordura 1000D (except for color EMP "Summer", "Condor" art. 04s27 "Mogotex"), high-strength lines, military grade Duraflex clips, high density foam with closed pores.
No posts found