AR Flash Suppressor By Strela

Save 6%
AR flash Suppressor  by strela
AR Flash Suppressor By Strela
360 AR flash Suppressor  by strela
Wish list Compare
In stock
Strela Manufacturer
Made In Ukraine
3 Piece Design
New Ships 2-3 Days
94% Flash Reduction


  • 5.45x39mm
  • .223 Rem (5.56x45mm)
Description Multi Caliber
Fit 1/2x28 Thread
Manufacturer Strela
Material Steel 45
Overall Length 3.0 inch
UPC Code 682821372834
Weight 7.8 oz.


AR flash suppressor for rifles AR-15, Z-15, Norinco CQ-A effectively removes the flash on 10.5 inches barrel by 90%, and by 94% on 14.5inch barrel. This device eliminates muzzle flash when fired and helps keep masking position. Painted with weapons matte paint, can withstand heat up to 300 degrees. The inner funnel made of stainless steel AISI 321 and titanium, does not corrode and is easy to clean. Flash suppressor has a very small size and weight.

Installation Instructions:

Note: Use a crusher washer before installing flash suppressor. Distance from the edge of the barrel before the funnel (must be between 2-4 mm). If this distance is greater than or less, performance will be reduced. 


No posts found

Write a review

You may also like